Germany
Manufacturer/ Producer
Germany
Precision Transmission Chains from iwis:Roller chains / Transmission chains
Request for a quoteGermany
iwis corrosion-resistant chains consist of hardened highly alloyed steels with good corrosion resistance et leur and considerably higher tensile and fatigue strength than ordinary stainless steel chains. CR chains can be used for all applications where chains need to remain flexible despite corrosive environments or must not rust for hygienic or visual reasons. Lubrication of CR chains is recommended. Highlights - High wear resistance if regularly relubricated - Good, long-lasting corrosion resistance in comparison with surface-coated chains - Significantly higher tensile and fatigue strength than ordinary stainless steel chains - Smaller dimensions possible
Request for a quoteGermany
Stainless steel chains according to ISO 606 (DIN 8187) , chain types 06B-1 to 16B-2
Request for a quoteGermany
The FLEXON range of Snap On Plate Top chains are two piece assemblies of base roller chain, in steel or stainless steel, onto which a plastic plate is mounted. The combination of the two elements creates a chain with high breaking load provided by the ELITE base chain plus the benefit of a very flat top surface.
Request for a quoteGermany
iwis Magnetic radial corner bends Having optimized magnet fluxes around the curve layout, the new generation of FLEXON Maxxtop Magnetic corner tracks from iwis virtually eliminates pulsation and can help reduce tensile forces in our curves by up to 60 %. FLEXON Highlights - Up to 60 % less tensile force than previous magnetic corner tracks - Reduced power consumption - Guaranteed energy saving - Possibility of longer conveyors reducing cost - Reduced chain wear - Reduced pulsation increases product stability - Quieter operation improves environmental conditions for employees - Excellent friction co-efficient properties reduces chain wear - Excellent material quality offers longer service life - FLEXON Maxxtop Magnetic corner tracks are available in all standard sizes - FLEXON Maxxtop Magnetic corner tracks can be manufactured to drawings
Request for a quoteGermany
You can rely on the cast steel chain C600 to deal with the toughest traction applications and move the heaviest loads. The chain’s simple yet robust cast steel design makes it an economical and highly resilient partner for the most rugged conditions and over long distances. Highlights • Breaking loads increased about 25% by using cast steel rather than cast iron chains • Alternative galvanized, zinc plated version for corrosion protection • Threaded pins in connecting link for easy closing and unclosing of chain • Both versions also available in plastic
Request for a quoteGermany
Gripchains with wear-resistant and corrosion-resistant clamping elements are used for gripping, pulling and transporting thin-walled materials with large surface areas. For example, in the packaging industry, the food industry and the electrical industry as well as in the production of circuit boards or in the metal processing. Key features - iwis high performance chain with excellent wear resistance - Marginal initial elongation due to optimal pre-stretching - High rigidity enables applications also in long machines - Basic chain chemical nickel plated - Flawless operating parallel as well as synchronously running chains due to practically identical chain lengths - All chains are provided with reliable, high quality initial lubrication, approved for use in the food industry - Differing levels of spring force allow an extremely wide range of materials to be gripped gently - Complete chain solution is ready-to-install -
Request for a quoteGermany
MEGAlife maintenance-free roller and conveyor chains can be used in all areas where relubrication is difficult or impossible. These include dry environments and applications where maintenance access is difficult. MEGAlife chains have nickel-plated parts and are therefore corrosion resistant and have an operating temperature range of -40°C to +160°C. Depending on the application, the maintenance-free chains are supplied either dry or with additional special lubrication.
Request for a quoteGermany
The new FLEXON SafeTopChain was designed with a completely closed upper surface, minimising the risk of crushing in curves or deflections and offering maximum stability for products and workpiece carrier systems. The special surface also enables even the smallest parts to be transported risk-free. Highlights: • Requires the same guides as the normal plastic multiflex chains from the 1700 Series • By using turning disks with a minimum radius of 123.5mm, dynamic friction is replaced by rolling friction; this allows longer conveyors with more curves, as well as vertical/spiral conveyor systems to overcome gradients and providing buffering. • Improved chain geometry enables the use of wider sprockets, thus reducing wear through lower surface pressure when teeth engage.
Request for a quoteGermany
iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets according to ISO 606 from size 05B-1 to 32B-3. Sprockets with taper-lock bushes Taperlock-bushes for fixing hubs precisely and axially centered on a shaft. Plate wheels Standard plate wheels for the complete iwis product program: sizes 05B-1 to 32B-3. Drive sprockets and idler wheels For the FLEXON Flat Top Chain program. Our drive components program consists of torque limiters, Couplings, Tensioners, Chain tools and etc.
Request for a quoteManufacturer/ Producer
Albert-Roßhaupter-Strasse 53
81369 München - Germany
Italy
PCHAINS are manufactured according to the international regulation din 8187 and din 8188. They are made by top quality steel whose mechanical features are very high. During the automatized assembly the PCHAINS are put under tension to set the dimension and to avoid strain in the initial pressure. PCHAINS are lubricated in oil , packed in plastic bags and then put in cardboerd boxes. You can find in the list the most used products. We can also supply special chains upon request such as “fragmentated” and “ringclosed”. Our technical service can give yuo further information on the materials and the special treatments we are able to offer to the customer. In 6 different dimensions they are suitable for electrical motors from size 63 (kw. 0.12 – 4 poles) to size 180 (kw.22 – 4 poles). The adjustable Motor Mountings are designed to solve the problem of the belt tension in power transmission.
Request for a quoteSouth Korea
With a boom in the construction of the drainage systems, the demand for better pipes arose, to replace traditional concrete conduits, coupled with the shortage of workforce and rising installation costs, as well as environmental problems. steel corrugated pipe (SCP) with its high outer pressure, enhanced structural strength, durability, and affordable prices, has emerged as an alternative. The steel corrugated pipe has an ideal drainage structure that can reduce construction expense and easy to install due to its excellent structural stability and durability and long life span. steel corrugated pipe : SCP 1RS : D300mm~D1800mm steel corrugated pipe : SCP 3RS : D900mm~D2400mm Korea industrial standards : KS D 3590 Corrugated steel pipes (CSPs) are mainly used as pipes for stormwater, drainage, sewage, and wastewater and can be applied in most civil engineering sites, including arable land readjusted, forest roads established, expressways, bridges, and agricultural waterways.
Request for a quoteGermany
The secutex chain sleeve protects the chain (sandblasting) and the slinger. The protective hose is not well suited for the intensive use and transport of sharpedged parts due to the high surface pressure and the lack of reinforcement. Please note The chain hoses are designed for chains of quality class 8 that conform to standards.
Request for a quoteGermany
The attachment chain may only be used as an attachment accessory without edge protection if a 20% reduction in load lifting capacity is taken into consideration or if the nextlargest chain thickness is used. Otherwise, a secutex SKK hinged edgeprotector must be used. A “sharp edge” exists when the edge radius is smaller than the nominal thickness of the lifting chain. Further information is available in the “sharp edge“ chapter.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.