Turkey
Manufacturer/ Producer
Turkey
Anilo Quartz Stone Carpet is the largest producing company of the region in the jointless floor and wall coverings, wherein it exports to a total of 21 countries in 3 continents including France, Russia, Azerbaijan, Kazakhstan, Qatar, United Arab Emirates, and Iran other than Turkey. Our company was established in 2010 and actually has more than 20 years of wall and floor covering experience. Anilo's daily production capacity is 500 tons. We realize you dreams with the Anilo Qwarts stones that are formed from the millions of particles that are obtained by Anilo mines after which they are sieved in 0.8 / 1.2mm, 1.5 / 2.5mm and 2.3mm. The quartz grains are colored with specially developed coatings, resulting in a very high quality that is more wear-resistant and more colorfast.
Request for a quoteAnilo Quartz Stone Carpet is the largest producing company of the region in the jointless floor and wall coverings, wherein it exports to a total of 21 countries in 3 continents including France, Russia, Azerbaijan, Kazakhstan, Qatar, United Arab Emirates, and Iran other than Turkey. Our company was established in 2010 and actually has more than 20 years of wall and floor covering experience. Anilo's daily production capacity is 500 tons. Guarantee Anilo Quartz Special Stone Carpet Flooring; High-quality guarantee (10 years) Stone Carpet produced by Anilo is resistant to sun rays(UV), water, chemicals, scratch-resistant, yellowing and fading.
Manufacturer/ Producer
ALTINKALE MAH. CIFTLIK CAD. NO: 268 DOSEMEALTI
07190 Antalya - Turkey
France
The extension adds 60 mm to the height of the terrace pedestal. This accessory is only compatible with decking and paving pedestal 150 to 260 mm high. It is possible to add up to 4 extensions on a pedestal to reach a maximum height of 70 cm. The pedestal extension is ideal for constructions with a large range of height to catch up. Once the extension is placed on the pedestal, it benefits from the same properties as the other pedestals and accessories of the mark. It withstands loads up to 1 ton, withstands variations in temperature from 40°C to + 60°C, UV rays, frost as well as acid and chemical products. Made in France, the RINNO PLOTS terrace pedestal extension is designed from polypropylene, a recycled and recyclable material. This product is respectful of the environment. The RINNO PLOTS brand “extension 60 mm” complies with the standards DTU 43.1 and 51.4.
Request for a quoteFrance
Designed to protect joists against moisture and rainwater and thus increase the life of the terrace. 100% waterproof band. Resistance Resistance to temperatures from 40°C to +60°C. Resistances to atmospheric agents UV and freeze. Robust, the band is tearproof and nondeformable. 100% waterproof, protect and extends the service life of the joists structure. Manufacturing Made in France, the RINNO bituminous tape is made with bitumen, aluminium foil and silicone protection. Conformity RINNO bituminous tape comply with current standards DTU 43.1. Self adhesive bituminous tape Place the tape on a dry and clean support. Adheres to most building materials wood, plastic, glass, concrete, metal. Ideal for wood, roof, piping, framing… Robust, the band is tearproof and nondeformable. Reduce resonance when walking on the terrace. Protects and extends the service life of the joist structure.
Request for a quoteFrance
The blades spacers allow you to obtain a regular spacing of the wood planks for terrace. This accessory for wooden decks helps prevent the natural movements of the wood can damage the installation, promote good air circulation and water evacuation. The deck board spacer is made up of 4 sides of different thicknesses 4, 5, 6 or 7 mm. The spacing of your deck boards between 4 and 7 mm must take into account the type of wood of the coating, the climate to which the terrace will be exposed as well as the desired aesthetic appearance. This easy and practical accessory ensures the durability of your deck. RINNO PLOTS “blades spacers” are made in France.
Request for a quoteFrance
The adjustable slab pedestal is a support for making the foundations of a terrace raised. It is placed directly on a soft and stable ground without requiring fixing. The slab pedestal can be adjusted to the nearest 150 to 260 millimeter using the red screw. The head of the paving pedestal has 4 lugs which ensure that the slabs are held in place. Their place defines a regular spacing between each of them. The slab pedestal can accommodate a slabshaped coating whether it is tiling, ceramic or gratings. Use only a coating measuring 2 cm thick at least. To define the number of pedestals required, 4 pedestals are needed for 1 slab. Thus, the pedestals are position cladding tiles for terrace at each angle. If you use tiles of large dimensions, it is possible to place an additional stud in the center of it by cutting the dewclaws on the head.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.