Steel - Import export

Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless steel plate, bright. Note: Swivel feet consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. The anti-slip plate absorbs vibrations and prevents the swivel foot slipping. For matching threaded spindles see 27810. For matching ball joints see 27811.

Stainless steel 1.4404. Version: Satin finished. Note: The hinges are made of weldable profile steel. The pin is fixed into the lower part of the hinge. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: Stainless steel 1.4404

Investment cast 1.4308 stainless steel. ISO 4762 cap screw and ISO 4032 hex nut, stainless steel. From ø30 mm ISO 4017 hex head bolt, stainless steel. Version: Electropolished. Note: The tube clamps with diameters 30 and 40 mm have a silicone sleeve that protects the thread of the hex head screw from contamination and damage. On request: Clamping levers for tightening. Accessory: - Round and square tubes 29050

Steel or 1.4305 stainless steel Version: Steel trivalent blue passivated. Stainless steel, bright. Note: Swivel feet consist of a threaded spindle and a plate joined together. Any threaded spindle can be combined with any plate. The height of the complete swivel foot can be calculated from the length of the threaded spindle + height of hexagon + 22.5 mm. (Overall height of swivel foot = L + L1 + 22.5 mm) Depending on the version, threaded spindles can have a thread undercut in front of the hexagon.

Seel version trivalent blue passivated. Stainless steel version bright. Note: The spherical washer levelling set is used to mount and align motors, aggregates, drive units and production lines. The spherical washer gives exact alignment of sloping faces with an inclination of up to 4°. The locknut secures a prescribed adjustment. Accessory: Spherical levelling washers 07460

Steel 1.7225. Stainless steel 1.4305. Version: Seel version trivalent blue passivated. Stainless steel version bright. Note: Levelling sets are used for mounting, levelling and aligning motors, aggregates, drive units and assembly lines. They have a large adjustment range of 15 mm to 40 mm. Other sizes available on request.

Steel 1.0718 or stainless steel 1.4305. Version: Steel electro zinc-plated. Stainless steel bright.

Stainless steel 1.4305 Lamellar insert polyamide (PA6). Seal ring CR / NBR. O-ring NBR. Version: Bright. Note: DIN EN 60423 cable glands with metric thread. Sealing and tension relief are provided by inset fins and a sealing washer. Rating IP68 (5 bar for 30 min). Cable glands are used for connecting fixed calbes and lines in housings, distributors and switch boxes. Temperature range: Static: -40 °C to +100 °C. Dynamic: -20 °C to +100 °C.

Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

From diameter D1 over 15 mm size increases are 0.5 mm.

From diameter D1 over 15 mm size increases are 0.5 mm. 1) Chamfer for insert

Steel or stainless steel 1.4404. Version: Steel electro zinc-plated. Stainless steel bright.

Steel. Stainless steel 1.4305. Stainless steel A4 1.4401. Version: Steel electro zinc-plated. Stainless steel bright. Note: Block hinges with fastening nuts and extended middle section for inset doors. Mounted with nuts (M6 or M8) from inside. The hinge can be mounted left or right. The opening angle is 180°. Supplied unassembled. Fastening nuts and washers are supplied.

Sheet Metal Stamping Parts We are professional sheet metal stamping parts China manufacturer from Ningbo, All stamping parts can be custom made in our factory Precision OEM punching bending metal

Ningbo FRIMA Machinery is an owneroperated company located Ningbo city in the east of China. We are a manufacturer which is specialized in producing nonstandard mechanical parts (custom parts) by CNC MACHINING, (https//www.frimaparts.com/cncmachiningparts/)STAMPING, INVESTMENT CASTING and ALUMINUM DIE CASTING process, Custom Stainless Steel Fitting, Brass fittings, Carbon steel fittings ,etc.

FRIMA Industrial is a professional manufacturer & exporter of metal and plastic parts in China. Since the establishment, we have controlled and inspected raw materials strictly to ensure the quality. Meanwhile, we are continuing to refine our manufacturing and processing systems to achieve customers’ requirements all the time. With stable quality, timely delivery and competitive prices, our products are widely used in construction machinery and equipment, coal mining and power transmission industry in more than 30 countries. We sincerely welcome friends from all over the wold to visit us and cooperate with us!

OEM Forging Auto Parts OEM Forging Auto Parts Manufacturer Process precision forging+ blasting+ cnc machining (https//www.frimaparts.com/precisionmachiningparts2/) Material Aluminum , Brass (https//www.frimaparts.com/brassforgingparts/) , carbon steel, stainless steel, iron Machining turning, milling, drilling, grinding, threading, CNC Finishing sand blasting, polishing, plating, acid treatment, anodizing, coating Design customized samples or drawings are accepted Weight range 0.1100KG Packaging paper carton + bubble bag Delivery time tooling/sample within 4 weeks, batch order within 4 weeks. Inspection all the products are strictly inspected by QC. We develop custom products for clients all over the world, such as 3D Robotics, Nvidia, Smart Systems and so on. We are experienced in many processes, such as stamping (deep drawing, bending), cutting (pipe cutting, profile cutting,

Ceramic ball bearings are fully resistant to corrosion as both the external and internal races are made of stainless steel, while the inner cage is made of plastic material, which is resistant against high temperatures. Thanks to the low friction of the ceramic balls, the seaming rolls require a reduced lubrication – up to five times less than standards. This saves time for the operators and the machine downtime, allowing increased production.

CVD coating is typically used for Stoody seaming rolls and chucks. Its main feature is its superior adhesion to the base steel, which provides a high resistance against wear and corrosion.

Seaming chucks and rolls made from tool steel are generally considered the industry standard for can factories, while canneries generally use stainless steel. Other types of steel are commonly used in the production of seaming chucks for Easy open covers, especially for those chucks that suffer from a weak chuck lip.