ROAL FIBRE (S.R.L.)

ARKPEEK-GF30: 30% Glass Fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature onditions. This is a special 30% glass filled PEEK modification that PEEKChina manufactures under the name PEEK GF30 natural. In comparison to unfilled PEEK, this glass fibre reinforced material exhibits increased mechanical strength and high rigidity. Furthermore, improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. As glass fibres tend in some cases to have a marked abrasive effect on mating surfaces.

ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. Composite material with PEEK matrix for parts with high structural characteristics Carbon PEEK is a composite material reinforced with carbon fiber, with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. The addition of carbon fiber makes the material even more resistant from a mechanical point of view and allows you to go further in the Metal Replacement process even in the most extreme industrial sectors. Carbon PEEK finds application in a wide range of industrial sectors. It is used in very specific areas where a further increase in mechanical performance is required for out-of-the-ordinary performance.

PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite

PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite