BIEGLO offers finished or semi-finished parts directly formed from polyimide powder with all the attributes of sintered PI. The advantage of direct formed parts are the lower costs as quantitiy is increasing. Due to almost zero percent waste during production it can be a more economic production method. Machined parts are widely used for small series high precision applications. Polyimide direct formed parts can be used in different applications: Automotive industry: racing engine fuel line. Jet engine: vane bushing or lock nut insert. Industrial machinery: hotrunner systems nozzles or plasma cutting torch as gas distributers or sealing components. Semicon HDPCVD Equipment: e.g. heater coil spacer. Life sciences: rotor seal or pneumatic surgical tool vane.
Germany
BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide rod. In line with different requirements of the Industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide rod can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.
Request for a quoteGermany
BIEGLO offers PEEK micro-mold parts up to 12mm in the largest dimension. Our smallest part to date is roughly 800µm x 300µm x 380µm and the thin wall section near 0.1mm. The feature aspect ratios around 6:1. In addition, the part volume 0.08 cm3 or less, the gate size as small as Ø0.1mm and the ejector pins as small as Ø 0.254mm. PEEK micro-mold parts must have a gate and ejection location consideration and the material selection can greatly affect the fill and definition of features.
Request for a quoteGermany
BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000 product line semi-finished products. Our polyimide semi-finished products meet the highest demands of various industries, such as the aerospace or the automotive industry. The polyimide semi-finished products are available as solid rods or sheets. Tubes can be produced as short, direct formed pieces. Polyimide semi-finished products are available in various compounds, for example with PTFE or graphite for better coefficients of friction. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.
Request for a quoteGermany
BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide sheets. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. In line with different requirements of the industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide sheet can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries.
Request for a quote