▪ Intermittent recording and storage of one or two pressure signals ▪ Evaluation of pressure signals using previously defined limit curves/ranges (“teach in”) ▪ Easy and intuitive operation ▪ 5” colour touch screen ▪ Voltage signal processing (0 – 10 V) ▪ Compatible with flowplus16 and flowplus-SPT M6 ▪ Easy assembly (plug & play and start up) ▪ Data backup with USB stick possible
Germany
▪ Modular setup with five different available dispenser sizes on each side ▪ Static mixing of two materials with same or different viscosities ▪ Adjustment of the desired mixing ratio by adjusting the speed ratio of both dispensers ▪ Volumetric dosing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for abrasive, filled or shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Linear relation between dosing volume and rotation speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ Different rotor and stator materials available as standard ▪ Long service life due to application-specific rotor-stator combinations ▪ Easy cleaning and maintenance due to quick assembly and disassembly options ▪ Mixing ratio 1:1 - 100:1 ▪ Volume flow of 0 - 1,300 ml/min (depending on mixing ratio, material and dispenser combination)
Request for a quoteGermany
The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers
Request for a quoteGermany
▪ Continuous volumetric and pulsation-free dosing regardless of viscosity ▪ For low viscosity and self-levelling materials (e.g. trickle resins) ▪ Low wear solution due to avoidance of material contact at shaft seal ▪ Uninterrupted production thanks to material reservoir with up to 350 ml usable volume ▪ Pressure and temperature sensor including sensor holder at pump outlet ▪ Level programmable using analog level sensor ▪ Filling under atmospheric pressure ▪ Optional connection for process gas (max. 0.2 bar pressure) ▪ Dispenser holder for easy and stable installation ▪ Increased process reliability due to integrated safety device ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs
Request for a quoteGermany
Our ecoPEN XS is a true volumetric dispensing system that applies the smallest amounts of singlecomponent fluids – for highprecision dispensing technology. Thanks to the proven endless piston principle, watery to pasty liquids are perfectly dispensed. A clean, processreliable dosage is achieved regardless of fluctuations in viscosity. - Dimensions (without cartridge and holder): length 178 mm, width 22 mm, depth 65 mm - Weight (without cartridge and holder): 175 g - Operating pressure: 0 - 6 bar - Max. dispensing pressure: 20 bar - Self-sealing: Approx. 2 bar - Viscosity: watery to pasty - Volume flow: 0.0044 - 0.35 ml/min - Min. dispensing quantity: 0.25 µl - Dosing accuracy: ± 1% - Stator material: vidur-C1 - Material inlet: Luer-Lock adapter for cartridge (cartridge can be rotated 360°) / Adapter for hose connection (Ø - 3mm) - Material outlet: Luer-Lock (patented) - Wetted parts: POM / vidur-C1 / stainless steel / HD-PE - Repeatability: > 99 %
Request for a quote