UĞURMAK UWB Series Wobbler Feeder is a necessary equipment of the crushing and screening process in case the blasted material has high moisture and sticky. The monolithic rollers, which are produced as steel cast, with discs arranged in a triangular form and offset from each other, are the main elements of the wobbler feeder. Shaft is in square form and is connected to the gearmotor by coupling. It transfers this motion to the roller thanks to its square form that receives the movement from the engine. The consecutive rollers move synchronously with one another. Thanks to this movement the compression and friction force formed between the advancing material and the disk parts of the rollers, the mud and sticky particles, thin and / or waste particles, are separated from the material and transmitted to the lower groove of the wobbler. Unwanted material is removed from the process before it reaches the main crusher.
Turkey
They are produced with double shafts. On the shaft, there are detachable fixed spiral leaves and washing shovels lined up with the most suitable combination. It is very easy to replace shovels and spiral leaves since they are detachable connected. These shafts are driven by motor, reducer and belt pulley system.
Request for a quoteTurkey
The most preferred reason for UĞURMAK brand mobile crushing units is the ease of assembly and disassembly. Temporary project works such as dams, road construction may need to be moved to a different site at the end of the project. In such cases, as these plants offer ease of transportation, they significantly reduce transportation costs.
Request for a quoteTurkey
UĞURMAK CDK Series Primary Impact Crushers have a design that allows the rotor, two pendulum systems and wear plates to work in harmony. Thanks to this compatibility, it offers high performance and low operating costs. It can provide very high size reduction ratios in breaking not very hard and non-abrasive materials. Thanks to these advantages, they are preferred in primary crushing stage in crushing and screening plants. According to the design of the facility, they can be manufactured as mobile, with fixed steel legs, with fixed concrete legs, with fixed skid chassis.
Request for a quoteTurkey
UGURMAK UMK Series Jaw Crushers are the most preferred types of crushers due to their strong design, ability to crush materials of any hardness, low operating costs and easy maintenance. Depending on the location of the facility, they can be manufactured as mobile, fixed steel legs, fixed concrete legs, and fixed skid chassis.
Request for a quote