Profile dampers axial damping
Profile damper
Description
Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants
- Nuts and bolts
- Dampers axial
- Nuts damping
Product characteristics
- Reference
- 26180
- Temperature range
- -40 °C to +90 °C
Documents
Similar products from NORELEM FRANCE
NORELEM FRANCE
France
Suitable for emergency stop and continual use. Energy reduction: 25% to 45%. Dynamic force absorption: 218 N to 3730 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Application: Linear slides and linear guides, pneumatic cylinders, furniture industry, machines and plants.
NORELEM FRANCE
France
Stainless steel 1.4308. Grub screw stainless steel 1.4305. Pin stainless steel 1.4310. Version: Ground and polished or blasted. Grub screw and pin bright. Drawing reference: Form B: drilled through Form C: blind hole Form D: tapped and counterbored Form E: tapped blind hole Form L: external thread
NORELEM FRANCE
France
Black thermoplastic. Bush and screw 5.8 steel or 1.4305 stainless steel. Version: Steel trivalent blue passivated. Stainless steel, bright.
NORELEM FRANCE
France
Steel, black oxidised. Stainless steel, bright. Note: Due to the better haptics, a larger pitch was chosen contrary to DIN. Drawing reference: Form A: without pin hole Form B: with pin hole Drill through and ream pin hole during assembly.