MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.
Italy
High speed with PLC and Touch screen control panel The new FPWK 0430-TOUCH model represents a remarkable evolution compared to the previous models because it can use polypropylene band with a thickness from 60 my to 150 my and polythene paper band with a thickness from 100 to 130 my. The maximum speed is 30 cycles/min. The machine is equipped with a Schneider Touch screen control panel (simple and intuitive) with which all the functions of the machine can be easily checked with the exception of the tensioning which is adjustable via a separate potentiometer. The standard bench model uses 150 m spools. but the machine can be installed on a motorized reel holder for rolls of 500-1500 m. The FPWK 0430 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales.
Request for a quoteItaly
Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions.
Request for a quoteItaly
Simple and reliable, it uses paper and polypropylene tapes 29 mm wide and 150 meters long. in the standard version. The machine can be installed on a trolley with motorized reel-holder for rolls of 500-1000 meters. (max. diam. 360 mm). Maximum banding light mm. 450x200H. Speed up to 20 cycles per minute. The tension of the band is adjustable by means of a handwheel positioned inside the wheeled base. Manual or automatic operation with sensor. The FPWK 0230 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales. Available in two models: FPWK0230B: standard bench version with adjustable strap tension via screw located inside the machine. FPWK0230P: version equipped with motorized reel holder with wheels. The strap tension can be adjusted by means of a handle located inside the machine.
Request for a quoteItaly
PNEUMATIC CLIPPER FOR GABIONS Large sturdy pneumatic clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm (mm. 13 for model FPPS45P-13). Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections.
Request for a quote