<CLM-500 BASIC INFORMATION> -Directly connectable with CP500. -Adjusted to exactly the same height as CP500. -Automatic dual side laser engraving. -Quality driven design with versatile density gradation. -Very eco-friendly, consuming only 300VA. -Easy onsite installation with front power switch. -Maintenance friendly with component type hardware.
Netherlands
The gas laser marker WATTSAN CO2 LT is designed to work with leather, fabric, paper, rubber, wood, ceramics, glass, plastic, and other materials. It is ideal for applying logos, photos and alphanumeric information. For ease of use, the marker is equipped with a launch pedal, which significantly facilitates the work in the numbering of finished products and mass production. Options and features: A 30 or 50 Watts Yongli laser tube with a service life up to 10,000 hours. Installation of a rotary device. Different working areas available: 150x150 mm, 200x200 mm, 300x300 mm. Laser power The machine is equipped with a laser tube of 30 to 50 Watts with a service life of 10,000 hours. Although this type of laser is less durable compared to the fiber optic one, its replacement will cost much less.
Request for a quoteGermany
The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q2 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 10 kHz. The pulse energy is 20 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.
Request for a quoteTurkey
Metal&Plastic Engraver: LaserPecker 3 is an optical infrared engraving machine for metal, and plastic. Using a 1064nm pulsed laser, no damage to the material. Ultra-High Precision: 4k precision, perfect picture reproduction. 0,01MM spot, visible details, LaserPecker 3 can help you complete what you what. Dual Red-Light Focus: Say goodbye to cumbersome measurement procedures and double light coincidence to determine the focal length. At the click of a button, you can automatically lift and descend and start engraving in the easiest way possible. Batch Engraving: Achieve batch engraving is not a problem. Use the batch button to engrave again with each click. Batch production of business cards and customized. You can open your own studio at home. No Restrictions: Unlimited time, place, and angle, just plug in and use. 360° rotation, no need to worry about the angle of engraving, bring a power bank, whether you are traveling or traveling, you can carry it with you.
Request for a quoteSouth Korea
BIOXEL uses fine laser beam to minimize skin damage by heat and to shorten the recovery and rejuvenation period. Treatment time can be shortened by adjusting spot size and the beam density, which is beneficial for both of the operator and the patient. [Features] Fractional Mode & General CO2 Mode & Dental Mode & LVR Mode Reduced Pain & Excellent Effectiveness Three Patterns : ARRAY, GRID, RANDOM Smart & Various Protocols for User’s Convenience Max 4489 dots to an area of 20x20mm Various scan shapes: Square, Hexagon, Triangular, Circular [Application] Fractional Hand Piece Skin tightening, Wrinkles, Large Pore, Skin Resurfacing, Acne scar, Stretch Mark, Laser Peeling, Age Spot, Pudenda, etc. General Hand piece (50mm or 100mm) Mole, Wart, Freckles, Birthmarks, Tumor elimination, Condylom, Syringoma, Snoring.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.